Operating Since 2014
Trusted Since 2014
1,000+ Projects
Successfully Completed
Based in Musaffah
Abu Dhabi
Own Machines
Trained Operators
Method Statement
Supplied
Trusted By Leading Companies
When You Need Floor Saw Cutting in Abu Dhabi
A floor saw is the right tool whenever concrete has to be cut horizontally and the surrounding slab has to survive intact. The blade cuts rather than impacts, so there is no shock loading into the structure, no spalled edges, and no over-break past the line you marked.
Contractors, project managers and facility teams call us for:
Trench Cutting for MEP
Electrical, plumbing, drainage and cable routes cut to exact width and depth so services drop straight in.
Expansion & Control Joints
Cut into new and existing industrial floors to help control cracking and maintain clean, defined joints.
Slab Openings
Lift shafts, stair voids, service risers and duct penetrations through structural floors.
Road, Pavement & Asphalt Cutting
Clean edges for reinstatement on carriageways, car parks, access roads and industrial yards.
Removing Damaged Floor Sections
Cut a defined panel out for replacement without disturbing the surrounding floor or slab.
Demolition Preparation
Section a concrete slab into manageable, liftable pieces before controlled removal.
If the concrete is vertical, wall sawing is the correct method instead. Floor saws are built for horizontal concrete cutting — floors, slabs, roads and pavements.
Not sure what type of concrete cutting you need?
Send a photo, dimensions and details of the area on WhatsApp and we will recommend the right cutting method.
Our Floor Cutting Services in Abu Dhabi
Precision concrete cutting for floors, slabs, trenches, roads and structural openings across Abu Dhabi.
Concrete Floor Cutting
Precision concrete floor cutting through reinforced slabs using diamond blades matched to the aggregate and rebar density. Cuts run to a chalked or laser line with a tolerance most consultants sign off on first inspection, leaving clean concrete cuts that need no chasing or making good.
Get a quoteTrench Cutting
We cut parallel lines to the required trench width, then break and clear the concrete between them. Depth is controlled pass by pass, which protects services running below the slab and keeps the trench floor level for bedding.
Get a quoteExpansion Joint Cutting
Joints cut at the correct depth-to-thickness ratio and at the spacing your specification calls for. Timing matters on new pours — we mobilise inside the cutting window rather than the next working day.
Get a quoteRoad and Asphalt Cutting
Heavy-duty floor saws for carriageways, hardstanding and industrial yards. Straight concrete cutting to a defined edge means the reinstatement joint is tight and the patch does not fail early under traffic.
Get a quoteSlab Openings and Structural Cuts
Structural concrete cutting for lift shafts, stair openings and riser penetrations through suspended and ground-bearing floors, executed to an engineer’s approved drawing.
Get a quoteConcrete Floor Removal & Breaking
Cutting and breaking of concrete floors, slabs and hardstanding areas after saw cuts are made. We use hydraulic breakers and suitable equipment to remove the concrete in controlled sections, keeping surrounding surfaces and structures protected.
Get a quoteWhat We Can Cut
Our floor cutting equipment and diamond tooling are selected to handle demanding concrete, asphalt and structural cutting requirements across Abu Dhabi.
Depth
Deep concrete cutting in controlled passes, with stepped passes or cutting from both faces where greater depth is needed.
Surfaces
Reinforced concrete, mass concrete, asphalt, screed, pavers, ground-bearing and suspended slabs.
Reinforcement
Diamond segments specified for reinforced concrete cutting — blades pass through rebar without snatching or tearing the slab.
Method
Wet cutting as standard, with slurry contained and vacuumed on occupied and finished floors.
Site Power
Diesel, electric and hydraulic saws — we bring our own power where site supply is unavailable.
Access
Machines sized for basements, plant rooms and internal floors as well as open external slabs.
We Scan Before We Cut
Safe concrete floor sawing in Abu Dhabi starts before the blade touches the slab. The risk on any floor is not the concrete — it is what is inside it.
Scan the Cut Line
Post-tension cables, primary rebar, conduit and live drainage can all sit inside concrete slabs. Hitting one can turn a routine cut into a structural incident or services outage. We scan the cut line before the blade touches the slab.
Mark & Adjust Before Cutting
We mark what we find and adjust the cutting line or depth with you before starting. If scanning shows the cut cannot be made safely at the position drawn, we say so before mobilising rather than after.
Permits, Approvals and Structural Sign-Off
Cutting a structural floor in Abu Dhabi almost always needs paperwork before it needs a machine.
Structural Clearance
On suspended and post-tensioned slabs we do not cut without a structural engineer’s approved drawing. If you do not have one yet, we will tell you what the engineer needs to see.
Method Statement & Risk Assessment
Supplied for every job, in the format main contractors and facility managers submit for permit-to-work.
Road & Public-Area Works
Cutting on carriageways, footpaths and public hardstanding requires municipal or authority approval. We supply the technical documentation your application depends on and work to the approved window once it is granted.
Occupied Buildings
Wet cutting with slurry recovery, plus night and weekend shifts, so live offices, hotels, malls and warehouses keep operating.
How We Work
Site survey
Access, slab type, thickness, power and water
Scan and mark
Rebar, post-tension and services identified on the cut line
Documentation
Method statement, risk assessment, structural clearance confirmed
Set up
Machine positioned, line set, water and slurry control in place
Controlled cutting
Depth built up in passes to the marked line
Clear and hand over
Debris removed, area cleaned, cut inspected with you
Where We Work in Abu Dhabi
| Zone | Areas Covered | Typical Response |
|---|---|---|
| Industrial | Musaffah, ICAD, KIZAD, Khalifa Industrial Zone | Same day |
| City & Islands | Abu Dhabi Island, city centre, Al Reem, Al Maryah, Saadiyat, Yas | Same day |
| Suburbs | Khalifa City, MBZ City, Shakhbout City, Al Raha | Same day |
| Wider Emirates | Al Ain, Ruwais, Western Region | Scheduled |
If your site is not listed, call — we cover the emirate.
What It Costs
Floor concrete cutting in Abu Dhabi is priced per linear metre, and the rate moves with depth and reinforcement more than anything else. A shallow cut in a plain screed and a deep cut through a heavily reinforced structural slab are different jobs at different rates.
Your Quotation Accounts For
Get an Indicative Figure
Send dimensions and a photo and you will have an indicative figure the same day. Firm pricing follows the site visit.
Why Contractors Use Al Raihan
We are a floor sawing company in Abu Dhabi, not a broker passing your job to a subcontractor. The machines are ours, the operators are ours, and the person who surveys your site is the person accountable for the cut.
Twelve Years in the UAE Market
Twelve years in the UAE market, 1,000+ projects delivered.
Our Own Diamond Cutting Fleet
Floor sawing contractors in Abu Dhabi with our own diamond cutting fleet.
Same-Day Survey & 24/7 Response
Same-day survey and 24/7 emergency response.
Method Statement & Risk Assessment
Method statement and risk assessment on every job.
Clean, Controlled Cuts
Clean, controlled cuts with no over-break or structural damage.
Full Clear-Down
Full clear-down — we do not leave debris behind.
Our Projects
What Our Clients Say About Us
Our reputation is built on quality work and customer satisfaction. See what homeowners, contractors, and businesses say about our core cutting, concrete cutting, and demolition services across Dubai.
FAQ
Get Your Floor Cut This Week
Tell us the location, the slab thickness and how many metres you need cut. You will get feasibility, an indicative rate and a mobilisation window the same day.