Musaffah M09
Abu Dhabi
Own Wall Saws
Not Rented
Every Wall Scanned
Before Cutting
Fully Insured
Debris Removed
Trusted By Leading Companies
Three Jobs, Three Different Prices
The type of opening, existing structure and required finish all affect the cutting method and the final price.
A New Opening Where There Was Never a Door
Solid RCC or block wall, fresh cut. Villa majlis entrance, internal doorway, access between two warehouse bays.
NEW OPENINGWidening a Door You Already Have
An 800mm doorway that now needs a 1000mm leaf, a double door, or wheelchair clearance. Almost always cheaper than a new opening — ask before you decide to cut somewhere new.
EXISTING OPENINGAn Opening Sized to a Specific Fitting
Fire doors, steel security doors, roller shutters, glass partitions. Where the supplier’s tolerance is 5mm and a rough opening will not do.
PRECISION OPENINGBefore We Cut, Three Things Get Checked
This is where door cutting jobs go wrong, which is why we do not quote from a phone call alone.
Is the Wall Holding the Building Up?
A block partition is a simple cut. An RCC shear wall, or a wall sitting hard against a column, is not — it may need a structural engineer to design a lintel or steel frame first.
We will tell you which one you have. If it needs an engineer, you hear that before you have paid us anything.
What Is Inside the Wall?
Rebar, post-tension cables, live conduit and water pipes can all be hidden inside concrete walls and slabs.
We scan every wall before cutting. Hitting a PT cable in a slab or a live conduit in a wall can turn a two-hour job into an insurance claim and a shutdown.
Does It Need a Permit?
In Abu Dhabi, cutting a new opening in an existing building is a structural modification and may require approval through the Department of Municipalities and Transport via the TAMM portal.
DMT-registered engineering consultants handle the relevant submission on the owner’s behalf. Civil Defence approval can also apply where the opening affects fire compartments or escape routes.
We Are the Cutting Contractor, Not Your Consultant
We work alongside whichever consultant you appoint. Our job is to make sure you understand what the cutting work is likely to require before you commit, and then carry out the cut safely and professionally.
Wall Saw, Not Jackhammer
Most people picture a breaker and a lot of dust. That is not how a professional door opening should be made.
The saw costs more per hour. It costs less per job once you count the repair.
What We Run
Diamond Wall Saw
Most openings, 100–600mm wall thickness.
Wire Saw
Very thick or heavily reinforced sections.
Stitch Drilling
Corners and tight access — stops the cut overrunning above the opening.
Handheld Ring Saw
Small widenings and finishing cuts.
Clean Corners Matter
We finish corners by drilling rather than running the blade past the line. That matters if the wall is exposed and you are not re-plastering the whole face.
We Match the Cutting Setup to Your Building
Slurry containment on wet cuts, vacuum-shrouded dry cutting where water is not acceptable — occupied offices, live retail and finished flooring. Tell us at the survey and the right setup arrives on the truck.
What Is Included, What Is Not
Nobody else on this search puts this in writing. We will. Here is exactly what is included in our wall cutting work and what may be quoted separately.
Included in Every Quote
- Wall scan before cutting
- Floor and surface protection, dust containment
- The cut itself, corners squared
- Removed concrete broken down and lifted out
- Debris removed from site
- Method statement, risk assessment and insurance certificate for building management
Quoted Separately
- Structural engineer’s design where the wall is load-bearing
- Permit submission through your consultant
- Lintel or steel frame supply and installation
- Making good, plastering and painting
- Door frame supply and fitting
- Out-of-hours or night working premium
We do not act as your DMT consultant and we do not submit permits ourselves.
Where We Work
Our wall cutting crews cover commercial, residential and industrial sites across Abu Dhabi and the wider emirate.
How the Job Runs
From the first WhatsApp message to a clean, ready-to-use opening, we keep the process clear, controlled and properly planned.
WhatsApp Us Photos
Both faces of the wall if you can, with a tape or a door in shot for scale. You get an indicative price back and a straight answer on whether it needs an engineer.
Free Site Survey
We measure, scan the wall, check access, confirm power and water. Fixed quote after this — never before.
Approvals
You or your consultant close the permit. We hand over the method statement, risk assessment and insurance documents building management will ask for.
Cutting Day
Protection down, containment up, cut made, section lifted out in controlled pieces.
Clear and Hand Over
Debris off site, opening square and swept, ready for the frame.
Most single door openings: one working day. Heavy reinforcement or restricted access: two.
What a Door Opening Costs in Abu Dhabi
Other companies quote per square metre. That is not much use when you are pricing one doorway, so we quote per opening — one number, agreed before we start, covering the cut, clean-up and debris removal.
We do not publish a price list, because two identical-looking doorways can differ by double. A 150mm block partition on the ground floor and a 300mm RCC wall on the fourteenth are not the same job.
Wall Thickness
Wall thickness and material affect the cutting time and equipment required.
Reinforcement
The amount of steel inside the wall can change the cutting method and duration.
Opening Size
Larger openings require more cutting, handling and controlled removal.
Site Access
Access, floor level and space around the wall can affect the overall job setup.
Working Hours
Daytime, out-of-hours and night work can have different requirements.
Making Good
Whether plastering, repairs or making good are included also affects the final price.
Want a Realistic Figure?
Send photos of the wall on WhatsApp — both faces, with something in shot for scale. You get a realistic figure the same day and a straight answer on whether it needs a structural engineer first.
Why Contractors and Owners Call Us
Local crews, owned equipment and a cutting process built around safety, access and the realities of working on UAE sites.
We Are in Musaffah, Not Dubai
Abu Dhabi jobs get an Abu Dhabi crew, not a truck sent up Sheikh Zayed Road.
We Scan Every Wall
Every job, every time. Scanning is one of the simplest ways to reduce risk before a structural cut.
We Own the Equipment
Our own wall saws, wire saw and concrete scanner mean no waiting on a rental yard and no arriving with the wrong machine.
We Will Tell You When Not to Cut
If your wall needs an engineer first, you will know before you have spent anything.
We Work in Live Buildings
Containment, night and weekend scheduling, and paperwork building management will actually accept.
Cutting Concrete Since 2013
Over a decade of villas, towers, warehouses and live-site work across the Emirates.
One team responsible from survey and scanning through cutting, removal and clean-up.
What Our Clients Say About Us
Our reputation is built on quality work and customer satisfaction. See what homeowners, contractors, and businesses say about our core cutting, concrete cutting, and demolition services across Dubai.
Frequently Asked Questions About Wire Sawing
Send Us the Wall. We Will Send You the Answer.
One photo on WhatsApp is usually enough — we can read wall type, rough thickness and access from it. Indicative price the same day, fixed quote after a free survey.