Cutting Since 2013
In the UAE
Own Machines
And Crews
Scanning Before
Structural Cuts
Night & Shutdown
Work Available
Trusted By Leading Companies
Diamond Wire Sawing for Thick and Reinforced Concrete
A circular blade has a finite cutting depth. As concrete gets thicker, the blade may not be able to cut completely through the section from one side. Diamond wire sawing works differently. A continuous loop of diamond-impregnated wire is routed around or through the concrete section and pulled under controlled tension. This allows the wire to cut sections that are beyond the practical cutting depth of conventional blade saws.
Wire sawing is particularly useful when:
Very Thick Concrete
The concrete is too thick for a conventional blade saw, such as pile caps, raft foundations and mass concrete.
Limited Access
There is limited access or not enough room to install a conventional saw track.
Irregular or Curved Shapes
The section has an irregular, curved or difficult shape that cannot be easily handled with conventional blade cutting.
Heavy Reinforcement
Heavy reinforcement makes conventional blade cutting impractical for the concrete section.
Low-Vibration Cutting
Low-vibration cutting is required near sensitive structures, equipment or occupied areas.
Large Concrete Sections
A large concrete section needs to be removed in manageable pieces for safer handling and removal.
Restricted Drainage or Shutdown
The work involves a structure that cannot be easily drained or taken out of service.
Controlled Demolition
Controlled demolition is required instead of breaking the concrete with heavy impact equipment.
If the wire can be safely routed around the section, it can be an effective solution for very thick and heavily reinforced concrete.
Need the right cutting method for your project?
For a standard door opening or a smaller straight cut in a normal wall, wall sawing may be faster and more economical. We assess the site and recommend the cutting method that fits the actual job.
What We Cut — Concrete Wire Sawing in Abu Dhabi
Specialist diamond wire sawing for thick, heavily reinforced concrete structures where conventional cutting may not be practical.
Foundations, Pile Caps and Raft Foundations
Diamond wire sawing can be used to cut thick reinforced concrete foundations, pile caps and raft sections for structural modifications, extensions, tie-ins and controlled removal.
Get a quoteBridges, Culverts and Infrastructure
Large concrete structures such as bridge decks, piers, abutments and culverts can require specialist cutting equipment. We plan the cutting sequence around the structure, access requirements and lifting arrangements.
Get a quoteColumns, Beams and Transfer Slabs
Wire sawing can cut heavily reinforced structural members where conventional blade cutting may not be practical. It can also be used where sections need to be removed in controlled pieces.
Get a quoteLift Pits, Tanks and Machine Bases
Industrial facilities, warehouses and other sites can require concrete cutting around existing equipment and structures. Wire sawing provides a controlled way to separate large concrete sections while limiting vibration.
Get a quoteControlled and Selective Demolition
Where breaking concrete with heavy impact equipment is unsuitable, diamond wire sawing can be used for controlled dismantling. Sections can be cut into pieces that can then be lifted and removed according to the project’s lifting plan.
Get a quoteTunnels, Shafts and Large Openings
Diamond wire sawing is suited to cutting large or irregular concrete sections in tunnels, shafts and structural openings where access is restricted or conventional saws cannot reach. Cuts can be planned in sections so the concrete can be safely lifted, removed and cleared from the work area.
Get a quoteOur Concrete Wire Sawing Process
Step 1 — Site Assessment
We inspect the concrete section, access, dimensions and surrounding area to plan the safest cutting and removal method.
Step 2 — Concrete Scanning
Where required, we scan structural concrete to identify rebar, post-tensioning cables, conduits and other embedded services before cutting.
Step 3 — Setup
We drill access holes where needed, then install the diamond wire, drive unit and guide pulleys securely around the cutting area.
Step 4 — Wire Cutting
The diamond wire runs under controlled tension while water helps cool the cutting process and control dust. Our operators monitor the equipment throughout the cut.
Step 5 — Section Removal
Large sections are supported, secured and lifted according to the planned removal sequence.
Step 6 — Cleanup
We remove concrete debris and manage cutting slurry, leaving the area ready for the next stage of work.
Underwater Wire Sawing in Abu Dhabi
Diamond wire sawing can also be used for concrete structures located underwater or in areas that cannot be easily drained.
Potential applications include:
Marine Piles
Quay Walls
Jetty Structures
Bridge and Marine Infrastructure
Water Intake Structures
Pump Chambers
Tanks
Concrete Structures Below the Water Table
Why Wire Sawing Works Underwater
One of the advantages of wire sawing in these environments is that the surrounding water helps cool the cutting process and suppress airborne concrete dust.
Careful Planning Before Underwater Cutting
Underwater cutting requires careful planning. Where diving is required, the work should be coordinated with the appropriate qualified diving team and carried out according to an approved dive plan. Lifting arrangements, access, structural stability and the sequence of cuts should be agreed before work begins.
Wire Sawing vs. Other Concrete Cutting Methods
Not every concrete cutting job requires a diamond wire saw. The right method depends on the thickness, shape, location and purpose of the cut.
Our team can assess the structure and recommend the most practical cutting method rather than using wire sawing for every application.
Concrete Scanning, Safety and Site Preparation
Wire sawing on a structural element requires more than simply setting up a cutting machine.
Before work starts, the cutting method, sequence, access, lifting arrangements and site controls should be reviewed. Depending on the project, this may include:
Our team can coordinate with the client’s site management, HSE personnel and structural engineer to establish the appropriate cutting and removal procedure.
Why Contractors Use Al Raihan Rental for Wire Sawing
Al Raihan Rental provides specialist concrete cutting services for construction, demolition, industrial and infrastructure projects across Abu Dhabi.
We focus on using the appropriate cutting method for each project rather than automatically choosing the largest or most expensive equipment.
Diamond Cutting Equipment & Trained Operators
Wire sawing contractors in Abu Dhabi with diamond cutting equipment and trained operators.
Cutting Experience Since 2013
Cutting experience in the UAE since 2013.
Abu Dhabi Service Coverage
Service coverage across Abu Dhabi and surrounding areas.
Complete Concrete Cutting Services
Wire sawing, wall sawing, floor sawing, slab cutting, core cutting and concrete scanning under one service provider.
Cutting & Controlled Section Removal
Support with cutting, site preparation and controlled section removal.
Night, Weekend & Shutdown Work
Night, weekend and planned shutdown work where required.
Solutions for Thick & Reinforced Concrete
Cutting solutions for thick, reinforced and difficult-to-access concrete.
What Our Clients Say About Us
Our reputation is built on quality work and customer satisfaction. See what homeowners, contractors, and businesses say about our core cutting, concrete cutting, and demolition services across Dubai.
Where We Work
We provide concrete wire sawing and specialist concrete cutting services across Abu Dhabi and surrounding areas.
Mussafah
ICAD
Khalifa City
Mohammed Bin Zayed City
Shakhbout City
Al Reem Island
Al Maryah Island
Yas Island
Saadiyat Island
Al Shamkha
Abu Dhabi & Surrounding Areas
Al Raha
We provide concrete wire sawing and specialist concrete cutting services across Abu Dhabi, including Mussafah, ICAD, Khalifa City, Mohammed Bin Zayed City, Shakhbout City, Al Reem Island, Al Maryah Island, Yas Island, Saadiyat Island, Al Shamkha and other areas across the emirate.
Service availability for Ruwais, the Western Region and Al Ain can be confirmed based on the project location and scope.
What Does Wire Sawing Cost in Abu Dhabi?
The cost of concrete wire sawing depends on the amount and thickness of concrete being cut, along with the conditions of the site.
Factors That Affect the Price
How Wire Sawing Is Estimated
Wire sawing is commonly estimated based on the amount of concrete being cut, but complex projects may also require additional equipment, access arrangements, lifting and temporary works.
Get an Initial Quotation
We can review drawings, photographs and approximate dimensions to provide an initial quotation. For structural or complex projects, a site assessment may be recommended before the final price is confirmed.
Frequently Asked Questions About Wire Sawing
Book a Wire Sawing Crew in Abu Dhabi
Have a thick or heavily reinforced concrete structure that needs to be cut?
Tell us what the structure is, its approximate thickness and dimensions, where it is located and when you need the work completed.